Braised is a laboratory for primary school students. There are often things that require some labeling, but they are naturally lazy and unwilling to write. Previously written directly on the tube with a marker, but there are write places to write inconvenient, so the idea of ​​using the label machine, after a long time of attention, taking advantage of this Epson LW-600P activity price ($80.36 total price direct mail ) Haitao started. Amazon is easy to get full, from the time of order to the receipt of goods for about two weeks, the time is acceptable. Open the box first:
This is the case after arrival, but the packaging does not look bad, it is a bit worn out. 
The inner package looks good, and then it's a box drawing:
The host adds two ribbons, this is in a package, a 12mm a 24mm white ribbon.
Data cable power cord host and two tag strips.
Software can be downloaded from the official website, what is simple to install, do not say, talk about the use of the entire machine:
The use of software is very convenient, but there is no other machine to compare, do not know if there is better, on this machine, it is a little strange that when you set the blank is less than 1cm, the machine will automatically Cut off the white, there will be more small pieces of about 1cm. However, according to the official website data, the smallest print edge of 1cm is much smaller than the other competitors' 26mm. Do you know if this competitor has evaluated it?
A label of two white and white, it is also a waste of feeling, but you really do not really have a few labels before and after, for a fixed-length label is still very appropriate. I was trying to label the centrifuge tubes. This stuff is about 35mm in circumference, so I set it to 1mm. Setting a fixed length will print a proper label, which is a waste of the small labels above. The 12mm printed label has two back stickers, which are relatively easy to tear off and the viscosity is also acceptable. The specific degree of durability is not good to test, generally we are placed in -80 degrees Celsius for a few years, it should be no problem.
The software comes with many tag styles and can be used directly
Of course, these are not very useful to me and they are meaningless. Print a sticker on the printer, only if you are familiar with the machine.
In short, this price is good to buy this machine, and Jin Gong compatible supplies are not expensive, they slowly play.