First of all, I want to explain that the T50 is not on the official website of the EPSON mainland. The model corresponding to the licensed mainland is the R330. It is theoretically the position of the successor R230. The R230 has survived the market for six months. Replaced by new models, it can be seen that Epson's accomplishments in photo printing are still quite deep.
This is R330 
As for the relationship between the L801 and R330, the official adds a officially certified CISS to the right of the R330 body. Every time you finish a color, you need to buy genuine supplemental ink. What? You want to add your own compatibility, I am sorry, there is a certification code on the ink box, plus the end of the input code to indicate the authenticity of your identity. In China, this full "mind" is really unacceptable.
This is the L301 for L330 
To sum up, the T50 is a parallel version of the L801 (R330) that is not even available for use (can you not be so busy with it?).
At that time, at Mayun's home to buy a good change machine and a set of ink is only about 1.3K, L801 to 2499 Ocean ah! ! ! It's cheap, mainly because it's cheaper to use later.
This is a photo of me after I bought it. It has been used for a long time, and even the fake opening maps are gone.
Well, please ignore the clutter behind the wire, I thought it could be virtualized, cream-like focus is not a 50MM lens.
Two photos for CISS: Is it right?
This is the original company's CISS (L801)
Look inside again, this is the ink cartridge, the original ink cartridge has already been removed to JS, changed into their exclusive supply, these six ink cartridges are also worth a lot of money
Too many professionals don't understand, so come directly to the finished product!
The first one was taken casually at the Guangzhou Auto Show in the past 12 years. Compared with the original image, the color is lighter. This phase was just bought when it was not yet set up.
So the effect is still less than satisfactory. Non-original inks are inevitably biased, or they have to fine-tune their own, but there is no spider school color. Fortunately, the night gave me a pair of black eyes, I used it to Looking for light. We have eyes No way to repent
Tossing for a while, the color seems to be such a thing,
This shot was taken in Aden. I removed the white balance of my camera and was very close to the original.
I will tell you that I use JPEG to make it easy Didn’t even save the opportunity?
Believe me, if you give me more gold, I will shoot it again with RAW! 
Advantages: cheap, or cheap, 4R RC photo paper about a 1 or so, plus almost negligible ink (I use a six-color 80 yuan pigment ink, a set of how many can be played, indeed Can not be estimated, too much), cheaper than printing outside, ah, there are wood, but also what picture quality, ah, the picture quality is still acceptable, much better than the previous Canon 399 (this is not nonsense you? ).
Because of the use of pigment ink, the photos were too exercise-resistent. In a rainy season, I took a stack of photos to get off the car and accidentally dropped the photos into the drains.
Then the rain keeps going, after a few days, it's still rainy (You're so much nonsense ) Uncle Uncle knocked on my door and asked if the photos were yours. I just found it in the ditch and suddenly my heart was going through the mud and horses.
At a glance, Nima's photo faded. There was none at all! ! ! ! Take the photo and rinse it with water. Let it dry. Don't feel wrong at all.
.
Disadvantages: Pigment ink is not afraid of water and not afraid of the sun, it is said that it can not change color for 100 years, but Nyima's easy to spray nozzle, ah, generally three days to fight once, or else to clean the nozzle program, cleaning a nozzle ink cartridge It's gone. My ink is not finished, but the cleaning nozzle is used for cleaning. OK, I'll call 4R in three days. Will I say that my current album is full of photos?
Another downside is that the six-color printers are not as good as the gray ones. Basically, they are black. There is no detail to speak of. However, this is also a common problem. There is no way. On the 12 color bar, local tyrants
PS: Give everyone a huge coup to print a coup:
All inkjet printers in the basic market have a waste ink tank with absorbent sponge inside.
Generally, each time you start up and perform nozzle cleaning, the printer will produce a little waste ink. This waste ink will be pumped to the waste ink tank and fixed with a sponge.
However, if you have a large amount of prints, or if you often do not print the print head plugs for a long time like a bead, you will need to clean the print head several times.
That sponge will soon overflow, and when you carry the printer once, you only notice that the SpongeBob has already fallen off.
It hangs off the ink that overflowed before it fills the ground... This picture is so beautiful that I can't bear to see it.
Don't ask me how I knew it. I'll go to the toilet and cry...
Solution: Open the mouth of the waste ink tank at the back, pull out the ink supply tube, and connect it to a container with a long tube (the tube I used with a hanging needle). Then you can print it with peace of mind.
This is a modified waste ink tank, an empty ink tank, and next to Fuji's sparkle, maintenance is really more worry-free than inkjet.
Print less or directly on the laser, worry! ! 