Brother Brothers Pfizer PT-P700 Label Printer Starts and Upgrades

In fact smzdm's favorite thing is not all kinds of things... but rather a very happy expression.

Although there was a value for money alone, there was no detailed usage and information sharing. As a tutorial expert, it can't stand it!

Explanation in advance: The sound of this machine is not really measured, and the consumables are covered, self-adhesive, do not worry about wear and color and long-term oxidation problems, the voltage is 220V, can be used directly

Text starts:

Has been looking at the recommendation, but did not really want to start things, until the arrival of the goods, I know, when the pickpockets arrived, is ambiguous, 剁 剁 a nothing ...

Why did you decide to go hand in hand because it's cheap Buy and play, the same paragraph Jingdong December 29, 2014 offer 1288, Haitao superior advantage! No consideration before buying practicality, but to see so many books, it should be necessary, such as the landlord in the school book Nothing to hold... you know, the previous actual effect, laminating, self-adhesive, so it basically meets everyone's taste.

The machine is ready to shoot, and the box is large. If you think this is small, then you are really wrong... But for machines that can print 24mm widths, plus a bargain We don't care about this volume.

Directly on the map, the size of reference green tea bottle, why is green tea ... Because the friend gave it at noon.... Anyway, this product was bigger than I had expected at first, but it was not really an exaggeration. It was just by the computer...

size

Inside the machine box comes a standard 24mm width ribbon, as if the length is 0.94 meters. I played about seven or eight labels. I haven't run out of it yet. I recommend taking the ribbon to practice!

There is also this machine is not open side, so be careful when you buckle the lid, from the side of the transparent hole on both sides of the light buckle can be

Ribbon can be directly pressed into it, remember the positive and negative

Then the lid was buckled and connected to the power supply. Yes, I forgot to say that this external 220V power supply also supports the battery, but I think that no one should use the battery. Section 6 Nanfu are top half of the consumables.

Power, after the USB cable is connected, long press the power button on the right side of the printer for about 2 seconds, you can boot, then the computer will automatically identify the drive, WIN7 64 measured no pressure, the middle button is cut paper, left Is a built-in drive button, long press two seconds, will come out a small drive, which is a basic print designer.

The editor that comes with it has nothing to do. It's very simple. It doesn't really work. The last picture shows everyone, press and hold the leftmost button for two seconds, come out the icon.

Open the main program PTLITE10.exe, is a simple designer, compact and practical, but the main event behind.

Share the various drivers and firmware update procedures collected this afternoon Please poke the download address (download address) on the right

Download all files given above

First we upgrade the firmware Obsessive-compulsive disorder, no way, this step is very simple.

Firmware upgrade please install the driver first, the default driver can not upgrade the firmware


The firmware upgrade is about 10 minutes, it's very slow, 1% is a little bit... patience some...

First install the pdp70w710bchs-drive.exe all the way to the next step to complete the installation [This step of the drive and automatic identification is not the same, the auto-installed driver can not run the firmware upgrade process]

Then unzip the plp700w10002e-firmware update.zip and run PtTrExp.exe

He will automatically identify the upgrade information and click Transfer.

Do not touch the power cord during the upgrade for about 5 minutes. Beware of power failure! Because there is no brick and repair tutorial at the moment, the power light will flash when the firmware is updated.

The machine will restart automatically after the upgrade

Then we install the editing software by double-clicking pew51030chs-editing software.exe all the way to the next step, this step may be a few minutes, wait patiently.

Then there will be shortcuts generated on the desktop, we double-click to enter, this editing tool is Chinese, and the function is quite powerful. Cable labels, kitchens, addresses, shops, notes are all templates. . . .

A separate screenshot illustrates the cable label. . . Very powerful labels, there are other various ....

Here is the actual test Finally to print, this picture is not clear because the resolution is low, not a label machine problem, in fact, the resolution is very strong, please refer to the label test below.

Of course there is a tag type designer The actual five-line Chinese resolution is clearly identifiable.

On a reflective sheet, the label comes with a film and adhesive layer, no worries, friction, friction on the smooth ground ...

In short, the effect can be printed, mainly, the price is cheap , Resolution As long as you have the patience to retouch the map, or you can, Chinese make a six-line so easy, if patience to play more lines is also OK, the only drawback is to make a call, each time will automatically cut off the 2424 size square. Meat hurts...

Several other programs briefly introduced

Puw10009 - Match printable tags. Exe downloads additional tag templates

Stw14003-configure machine settings.exe can upgrade the built-in PTLITE10 editor [this upgrade is also slow, take 10 minutes]

ptp700_schn_soft_0-Software User's Manual.pdf [English]

ptp700_schn_usr_lad939001-Chinese manual.pdf [Chinese]