What cell phones have built-in coprocessors? Introduction to five cell phones with built-in coprocessors

Built-in co-processor phone: glory play 5C

Yao Chang playing 5C is a 16-nanometer 8-core chip - the first show model of the Kirin 650, using a 5.2-inch 1080P display, equipped with an Android 6.0-based development of EMUI 4.1 system, its birth will re-define the thousands of new machine industry Standards promote the popularization of 16-nanometer chips in the 1,000-yuan market.

Glory Play 5C has 8 million + 13 million pixel camera, fingerprint recognition 2.0 and other selling points. Its new 16nm process unicorn 650 processor, has a good performance, using 5.2-inch 1080P screen, bringing high-definition picture. Glory Play 5C is equipped with Hass latest unicorn 650 processor, using a 16nm FinFET process process, and built-in i5 co-processor, can provide the screen pedometer function at lower power consumption. Equipped with 2GB RAM 16GBROM memory combination, using 5.2 inches 1080P resolution screen, front 800 million pixel camera rear 1300W pixel camera, built-in 3000mAh capacity battery, dual card dual standby, running Andorid 6.0 version of the system.

What cell phones have built-in coprocessors? Introduction to five cell phones with built-in coprocessors

Built-in co-processor phone II: iPhone6

The Apple 6 uses the M8 coprocessor, which continuously measures data from the accelerometer, compass, gyroscope, and the new barometer to share more workload for the A8 chip, which improves performance. Not only that, these sensors now have more features, such as measuring the number of walking steps, distances, and altitude changes.

iPhone 6 uses a 4.7-inch screen, resolution of 1334 * 750 pixels, built-in 64-bit architecture Apple A8 processor, performance is very obvious; also with the new M8 coprocessor, designed specifically for health applications; 8 megapixel camera, front 1.2 million pixels 鞠昀 Photography FaceTime HD high-definition camera; and add Touch ID support for fingerprint recognition, the first new NFC function; is also a three Netcom mobile phone, 4G LTE connection speed up to 150Mbps, supports up to 20 LTE frequency bands.

What cell phones have built-in coprocessors? Introduction to five cell phones with built-in coprocessors

Built-in co-processor phone III: iPhone 5s

iPhone5s is a mobile phone launched by Apple in the United States in September 2013. On September 20th, iPhone 5s was launched in 12 countries and regions, including China for the first time. The first-week sales exceeded 9 million. At the end of 2013, the well-known American technology media "Commercial Insider" put together "the most innovative ten devices of the year", and the iPhone 5s was selected for its fingerprint recognition function.

The biggest change in the iPhone 5s compared to the previous iPhone series is the addition of Apple’s latest A7 processor and the M7 motion coprocessor. The CPU/GPU performance is 2 times faster than the iPhone 5 A6. The GPU A7 integrates the quad-core PowerVR G6430. The A7 is also the first CPU to integrate this core and supports OpenGL ES 3.0. The A7 is also the first ARM-based 64-bit processor to be used on smart phones, using the 28nm HKMG process. The CPU/GPU performance is 2 times faster than the iPhone 5's A6, the CPU performance is 40 times that of the original iPhone, and the GPU performance is 56 times that of the first generation.

Apple also added a coprocessor M7 for the A7 processor. The M7 is actually a NXP LPC18A1. It is a member of the LPC1800 series developed on the basis of the ARM Cortex-M3 and is specifically designed to handle gravity accelerators, gyroscopes and compasses. For data, these data were processed by the CPU before the introduction of the iPhone 5s, resulting in an increase in the CPU frequency and the inability to collect data all the time. However, if the low-frequency M7 is used for processing, the CPU can sleep (that is, when the screen is turned off). The data is collected to determine the state of motion. It can determine whether the user is walking or driving or sleeping throughout the day. The system can be adjusted according to the status, such as not automatically adding a new WIFI when driving.

What cell phones have built-in coprocessors? Introduction to five cell phones with built-in coprocessors

Built-in coprocessor phone four: Huawei mate8

Huawei mate8 with i5 coprocessor. Huawei Mate8 adopts an integrated all-metal body design, 6-inch 1k screen, Kirin 950 processor, ARM Mali-T880 GPU and i5 coprocessor, 3G RAM+32GB, 64GB, 128GB ROM, 8 million+16 million ( Sony IMX298 stack-type camera with fingerprint recognition, 4000mAh battery, supports 9V/2A fast charging technology, 2.5 hours can be fully charged, Android 6.0 EMUI 4.0 operating system.

Huawei Mate8 integrates Huawei's cutting-edge technologies and is Huawei's flagship, highest-end, and heaviest weapon in 2015. Inherits Mate 7's large screen DNA, using a 6-inch FHD screen. The all-in-one metal appearance has been fully upgraded, using 52 processes, and the lines are more fluid and smooth. At the same time, the surface of the metal body is covered with 2.5D diamond-cut glass, and the metal and glass adopt the same consistent diamond cutting technology. The combination of the two is more perfect and smooth, and the body is more handsome and elegant. Equipped with a Kirin 950 processor. The aircraft supports a new fingerprint 2.0 recognition technology, Knuckle 2.0 technology. Equipped with a 4000mAh large-capacity battery, it also supports fast charging technology, charging for 5 minutes to talk for two hours, to better solve the user power problem.

What cell phones have built-in coprocessors? Introduction to five cell phones with built-in coprocessors

Built-in co-processor phone 5: Meizu MX3

Apple M7 co-processor technology, not Apple's first, Meizu MX3 also uses this technology, Meizu call it Sensor Hub, using another microprocessor to help processors manage some of the tiny data operations, let the CPU Have a good rest, thereby reducing the overall power consumption of the MX3. The tiny chip on the left of the center microphone, model 32UC3L0128A, is the deity of the Sensor Hub. In fact, this is a 32-bit AVR microcontroller from ATMEL. Through this chip, Meizu can use a low-power method to obtain and analyze the data obtained by all sensors, so that the system can better determine the status of their own, even in the dormant time can also continue to obtain sensor information, also Not much power consumption. Why can't other vendors' homes wake up the system, while the Meizu MX3 can? It's because there is a Sensor Hub.

Metallic Braided Sleeving

Description of Metallic Stainless Steel Braided Sleeving

Stainless Steel braided Sleeve is used as flexible jointing wire of electric appliance, switch appliance electric stove and storage battery etc. such as Cable, CRT Assembly Wire, Television, Computer Monitor, ETC signal pickup instruments. Braided copper wire can be provided rolled flat or in tubular form. Flat braids are generally used for flexible connections, electrical leads and grounding straps. The tubular braids are basically used as shielding.

Features of Metallic Stainless Steel Braided Sleeving

High physical strength with light weight and a long usage life.
2. Good corrosion characteristics, resistance to high temperature, moisture, abrasion and penetration.
3. Good flexibility, absorb effectively vibration, noise, thermal expansion and contraction from pipeline system.
4. Quick alternative for rigid piping in difficult locations, resolve minor deviation because of piping connecting and eliminate the pipeline residual stress, corrects problems of misalignment.



Metal Braided Cable Sleeve,Metallic Braided Sleeving ,Metallic Pet Braided Sleeving,Automotive Metallic Braided Sleeving

Shenzhen Huiyunhai Tech.Co.,Ltd , https://www.hyhbraidedsleeve.com