Manufacturer's instructions: After-sales maintenance and cleaning of refrigerators

Proper and regular maintenance can extend the life of the refrigerator. But be sure to unplug the power plug before servicing the refrigerator! Manufacturers professionals also hope that the majority of users pay attention to the following points:

1. When unplugging the power cord or short-term power failure, wait 5 minutes before turning on the power, otherwise it will affect the life of the compressor and even cause damage.

2. The inside of the refrigerator should be cleaned at regular intervals (preferably when it is frosted). It can be wiped with a clean soft cloth, warm water and a neutral detergent, and then wiped with clean water. It is best to clean it with a dry cloth. (Attention: It is forbidden to wash the outer surface of the refrigerator directly with water so as not to affect the electrical insulation performance. It is forbidden to scrub with abrasive powder, washing powder, alkaline detergent, alcohol, gasoline, acid, corrosive cleaning agent, hard brush, etc.)

3. Always remove the dust on the back of the refrigerator, the left and right side plates and the shield behind the cabinet to improve the cooling efficiency and maintain good ventilation.

4. When the refrigerator is decommissioned for a long period of time, it is necessary to cut off the power first, take out all the food inside the box, clean the inside and outside of the box, open the door for several days, make the inside of the box fully dry, and disperse the odor. Turn on and off several times during the decommissioning process. (It is recommended not to stop for as long as possible)