2 Channel 1000W 8ohm Professional Power Qsc Amplifier

  • Model NO.: CH1000
  • Usage: Hi-Fi, KTV System, Stage
  • Tube Type: Transistor Amplifier
  • Sound Channel: 2.0
  • Voltage: AC 220V
  • Conductive Mode: H
  • 4ohm Stereo Power: 2000W*2
  • 4ohm Bridging Power: 4000W
  • Thd: <0.05%@8Ω1kHz
  • Impedance Coefficient: 200@8ohm
  • Net Weight: 19kg
  • Transport Package: Amplifier Will Be One PC in One Carton with Foam
  • Origin: Guangzhou, China
  • Type: Professional Amplifier
  • Used For: Professional
  • Function: Amplifier Combined
  • Output Number: 2
  • Element Number: Push-Pull Amplifier
  • 8ohm Stereo Power: 1000W*2
  • 8ohm Bridging Power: 30000W
  • Frequency Response: 20Hz-20kHz/ +0/ -0.5dB
  • Snr: >100dB
  • Power Supply: AC220V±10%50Hz
  • Trademark: Jusbe
  • Specification: 680483*88mm
  • HS Code: 8518220000

2 Channel 1000W 8ohm Professional Power Qsc Amplifier

Product Description
Product Name PA mixer audio tube amplifer harga power amplifier tasso qsc power amplifier
Item No. CH250 CH300  CH400 CH600 DH-3
8Ω Stereo Power: 250w*2 350w*2 450w*2 600w*2 120w*2
4Ω Stereo Power 400w*2 550w*2 700w*2 900w*2 160w*2
8Ω Bridging Power 750w 1050w 1350w 1800w 280w
4Ω Bridging Power 1000w 1400w 1800w 2400w  
Cooling Method wind cooling
Channel Resolution(within 1 KHz)  >60dB
Frequency Response 20Hz-20KHz/ +0/ -0.5dB 20Hz-20KHz/ ±0.5dB
THD  <0.025%@8Ω1KHz <0.05%@8Ω1KHz
SNR >100dB >105dB
Input Sensitivity 0.775V
Conversion Rate >20V/μs 
CMRR >70dB
Input Impedance Balanced 20KΩ; Unbalanced 10KΩ
Impedance Coefficient 200@1KHz/8Ω
Protection Peak limit; overload; DC; short circuit; overheating; SS 
Control Front panel: power switch/ channel1&channel 2 volume control
Back panel: pattern/ Sensitivity/ earthing switch
Input interface  3 pin XLR
Output interface Binding post & Speak-on NL4*2 pin1 + /2 + POS (plus/minus 4 cores security socket)
Amplifier Circuit class H
Main Fuse 10A
Power Supply 220V/50Hz
Product Size(mm/set) 345*483*88 482*304*88
Net Weight 10KG 11KG 12KG 15KG 18KG
Main features:
H-class professional amplifier circuit, high efficiency, stable and reliable performance;
Cooling system can automatically adjust the fan speed, small signal when the low-speed operation, high-power fan speed automatically increased;
Can achieve the power and weight, power and volume ratio of the limit, super lightweight design, smaller, lighter weight; super load capacity, ultra-low noise;
Professional zero thermal barrier heat dissipation program;
Built-in compression limit function to ensure that the system work properly, reduce distortion;
XLR full balanced input, reduce noise, with XLR balanced output socket, multiple amplifiers can be used in parallel;
Suitable for multi-functional conference rooms, music bars, in particular, to meet the needs of small and medium-sized performances occasions.

The main technical parameters:
8Ω stereo power: 1000W × 2;
4Ω stereo power: 1500W × 2;
8Ω bridge power: 3000W;
4Ω bridge power: 4000W;
Cooling method: air cooling (fan temperature control design);
Channel separation (crosstalk) at 1KHz:> 60dB;
Frequency response: 20Hz-20kHz + / _ 1db;
Total harmonic distortion: <0.025 %@8Ω1KHz;
Signal to noise ratio:> 100dB;
Amplifier circuit: H class;
Conversion rate:> 20V / μs;
Input common mode rejection ratio:> 70db;
Input impedance: balance 20K ohms and unbalanced 10K ohms;
Impedance factor:> 200 @ 1kHz / 8Ω;
Input sensitivity: 0.775V;
Protection: peak limiting, overload, DC, short circuit, overheating, soft start;
Control: Front panel: Power switch / channel 1 Channel 2 Volume control;
Rear panel: mode / sensitivity / earthing switch;
Input interface: 3 pin (XLR)
Output interface: terminal and SPEAKON NL4 × 2 PIN1 + / 2 + POS (plus or minus 4 core safety socket);
Main fuse: 10A;
Power requirements: 220V / 50Hz;
Body size: (D) 345 * (W) 483 * (H) 88 (unit: mm);
Net weight: 18kg.


2 Channel 1000W 8ohm Professional Power Qsc Amplifier
2 Channel 1000W 8ohm Professional Power Qsc Amplifier
2 Channel 1000W 8ohm Professional Power Qsc Amplifier



2 Channel 1000W 8ohm Professional Power Qsc Amplifier

Packaging & Shipping

2 Channel 1000W 8ohm Professional Power Qsc Amplifier
FAQ

1.Q: Are you a factory or trading company?

A: We are a manufacturer (with our own factory)  since 2000.  We are a leading manufacturer, exporter and supply chain service provider on professional audio system.

2.Q:Where is your factory located? How can I visit there?

A: Our factory is located in Nancun District, Guangzhou City, Guangdong Province, China. 

    About 30mins by car fromGuangzhou South Railway Station, We welcome customers from all over the world !

3.Q: Can you do OEM and ODM?

A: Yes, both. We can put your idea into products.

     We have professional research  development team, develop the products according to customer required.

crimping machines

crimping machines,Wire Crimping Tool,Crimping Tool,Pipe Crimping Machines

Power Cable Socket Lamp Co., Ltd. , http://www.nbpowercables.com