· In just two years, Jeep has achieved the top three joint-venture SUV sales performance in the largest mass of the gold price band in the mainstream joint venture SUV market, becoming the most successful domestic joint venture brand in the past 10 years. one;
· Since the launch of the new Jeep guides, the Japanese evergreen tree CR-V has reached the 180,000 range, and the momentum of the brand's rapid development has been maintained under the environment of the new brands in Europe and the United States. From January to May, the new Jeep guides achieved the first-ever sales volume of 1800-200,000 joint-venture compact SUVs, and reached 8,300 units in May, reelected as the “new kingâ€;
· European performance + ultra-low fuel consumption, European control + US Department of comfort, hardcover mansion + smart home, outside the 64% high-strength steel body + super 70 active and passive safety technology, and proud of the same level Professional 5 road conditions, under the outer just soft inner blessing, the official price of 179,800 yuan new Jeep guide "200T home enjoyment" models become popular consumers in the eyes of "180,000 will buy a family SUV";
Since its launch, the new Jeep guides have seen sales skyrocketing. Even with the cold market in 2017, the SUV's growth has slowed sharply, and it has continued to grow rapidly. The popularity of this professional-grade home SUV stems from its strong brand power and its product strength that fully meets consumer demand. As the heart of a car, the new 1.4-liter Multi-Air®2 turbocharged engine powered by the new Jeep guide can intelligently breathe, combining the three advantages of power boost, fuel economy, and energy saving and environmental protection, combined with reliable reliability. Quality, the engine that this guide carries, has also become the source of power for its 180,000-range, mandatory SUV.
From "Near Perfection" to Perfection, Jeep Builds the Strongest Engine in 1.4T History
We all know that the most important means to increase the output power of a gasoline engine is to “increase the intake air volume,†and increasing intake valves and installing boosters are all for this purpose. In the long-term experimental study, in order to more actively and actively control the intake air, a "engine variable intake valve technology" came into being: Through the active control of the intake valve opening and closing time and lift, to achieve the engine intake The amount of active control, so as to achieve the purpose of improving engine power output.
In general, the application of engine variable valve technology provides safe protection for the engine under various conditions. Different valves through the opening and closing, for the engine to take in fresh air to participate in the combustion, but also the exhaust gas out of the cylinder, so the valve system is a good fit, and even if the time is accurate, will have an impact on engine performance. We generally believe that this technology has gone through three stages since its appearance:
1.0 Era - Control air intake by adjusting the opening and closing time of the intake valve. The representative technology is Honda's vtec, which is mostly equipped with Honda's early motorcycle and automobile engines.
In the 2.0 era, more accurate control of the intake air quantity was achieved by adjusting the opening and closing time of the intake valve and the opening angle in stages. Representative technologies include Toyota's VVT and Honda's i-vtec, which are commonly used on the market with CR-V.
3.0 Era - Through the infinite adjustment of the intake valve opening and closing time and opening angle, to achieve precise control of the engine intake air under different conditions. Representative technology BMW VANOS and Jeep's Multi-Air®2, common models such as the luxury car benchmark BMW 7 Series and the new Jeep guide.
In the era of "variable intake valve technology 2.0", we often heard such slogans: "The new CR-V equipped with i-vtec technology, making it a near-perfect car engine!" What is the perfect engine What do we call "breathing engines"?
The Multi-Air® 2 technology allows the new Jeep guide's engine to learn to breathe, and it also makes the strongest ever 1.4T engine. This module technology from European technology development and partaking with BMW completely changed the way the traditional engine is driven by the camshaft to open and close the valve. Through a flexible and fast electronic hydraulic system, it can control the engine valve opening and closing in real time according to different operating conditions. Directly to achieve arbitrary control of the intake valve opening time and length of the angle, to achieve "continuously variable speed." With this technical support, the engine's displacement of only 1.4 liters can output about 121 kilowatts of maximum power. At 1900 revolutions, it can erupt 90% of the peak torque, and the power is even astonishing 86 kilowatts. Most of the mainstream 1.6T, 2.0L displacement engine performance, full of explosive power in daily driving, has become a well-deserved "small engine king." This leading Multi-Air technology is not the first time in the Jeep model, Jeep hot models new Jeep free light 2.4L tiger shark engine is using the same technology. The engine can not only output a maximum power of 128.5 kW and a maximum torque of 230 Nm., resulting in efficient power output and excellent fuel economy. It can also be maintenance-free for lifetime, more reliable and less worrying.
What are the advantages of this kind of performance? Take a look at the i-vtec variable valve technology used in the CR-V to know that the sectional valve adjustment method makes the power output of the engine not linear enough, and the intake valve opening and closing control is more like being The installation of an automatic transmission has failed to achieve "promise change." This congenital technical flaw makes even the 2.4-liter displacement CR-V, the maximum torque can only output 243 Newton meters, the power is only a poor 57 kilowatts, indicating its mechanical strength, materials and processing technology All fall under the wind.
Benchmark technology achieves a multiplier of oil
The application of Multi-Air®2 technology has made the new Jeep guider oil more efficient. Nowadays, the most technologically advanced Multi-Air® control technology has been developed. Nowadays, the more mature 2nd generation system is adopted. Compared with the previous generation, the Multi-Air®2 module has been optimized and upgraded in terms of hardware and control logic. More precise continuous adjustment. At the same time, this engine is also equipped with an intelligent generator and its management system (SAM), with partial braking energy recovery. This system sets different target charging voltages by receiving parameters such as engine speed, load and current battery charge (SOC). During deceleration or braking, the smart generator converts some of the braking energy into electrical energy, and charges the battery by increasing the target charging voltage. When the vehicle is accelerating, it can reduce the target charging voltage to reduce fuel consumption and increase the torque. The actual test, SAM application can save about 2% of the fuel consumption.
From the Honeywell Small Inertia Turbine, it is possible to bring about a better turbine response, and it is difficult to feel the pressure before and after the turbocharger is in the acceleration process. The two benchmarking technologies complement each other and bring the most linear power output experience to the new Jeep guides.
Advanced technical support makes it possible to achieve lower fuel consumption and better performance than conventional engines with 1.6 to 2.0 displacement. With 1.4 liters of displacement and 7 oils, the new Jeep guides will not lose the Japanese evergreen tree - CR-V, truly European performance, ultra-low fuel consumption. More importantly, at the same time as low fuel consumption, it can also reduce CO and hydrocarbon emissions by 40% and reduce nitrogen oxide emissions by 60% compared to other engines of the same displacement, and achieve win-win targets for power performance and energy conservation and environmental protection.
Experience a lot of hard work
Although the Multi-Air® 2 module system technology is derived from Europe, it is still subject to harsh localization testing and optimization before being equipped with new Jeep guides.
More than 10,000 hours of engine bench testing, more than 1 million kilometers of road testing, fully guarantee the durability of the engine. -30 to 120 degC deep cold and heat shock tests to test the reliability of the engine in extreme conditions, including collisions. At the same time, the poor oil verification with an octane number of 89 ensures the reliability of the engine under the vicious conditions. In addition, GAC Fick also specifically uses the domestic No. 92 gasoline to calibrate the engine electronic control unit, and accumulates more than 3,000 hours to test altitudes of up to 5,200 meters. For various subsystems of the engine, such as lubrication, cooling, distribution, and boosting The system performs performance tests to optimize engine performance and fuel consumption, ensuring that the engine can meet the needs of any domestic environment. All of the above, let the new Jeep guides have the strongest "heart" of the 180,000 range, and let consumers have a most reliable engine.
Of course, in addition to the stronger benchmarking power at the same level, the 64% high-strength steel body at the same level and nearly 70 active and passive safety “black technologies†are home-built mobile fortresses; they are derived from four independent adaptations. Damping system, more exquisite internal control design and humanized intelligent configuration, brings full comfort of the scene, full contact; from the professional level of the top 5 road conditions capabilities, to achieve home and distant, one in place, so that new Jeep guides can still make great strides in the Chinese SUV market, and become the best choice for the 180,000-range home SUV. I believe that with the continuous improvement of market awareness, the new Jeep guides will surely consolidate the status of "180,000 must-buy family SUVs!"
[About Jeep]
Since its inception, global SUV leader Jeep has insisted on creating more professional SUVs. In the course of continuous inheritance and development, it has evolved four superpowers that represent the core of the family, including industry-level professional-grade road conditions. Efficient and smooth powertrain, precise road handling and ride comfort, as well as leading and complete safety, and formed a strong lineup of products covering all segments of the SUV segment of RMB 1.7-700,000, which has also contributed to its success. The only SUV brand in the world that has sold more than one million cars each year. All along, Jeep has always used his innate professionalism and feelings to accompany a generation of generations on a journey to explore the wider world and gain a true sense of superiority.
In 2017, the sales volume of domestic troika has continued unabated. In May, the domestic passenger car market sales were sluggish. According to the latest statistics from the National Passenger Vehicles Association, sales of passenger cars decreased by 1.8% from the same period last year. The rapid growth of the SUV model market has been slowing down. Only in the weak market environment can we see who is the real strong player. GAC Fick's domestic family has grown in a contrarian fashion, hitting a record high, achieving a year-on-year growth for 17 consecutive months, and an astounding 7.1% market share. At the same time, it is also accumulating 175% of the year-on-year increase in pressure on competitors and accumulating sales. With 90,000 units, the sales volume is inseparable from that of Buick, a car brand that has been cultivating for many years in China. Along with Tiguan L and Angkewei, the brand-new Jeep Free Light of the first camp of 20,000 to 300,000 high-end medium-sized SUVs continued to show strong performance, and the cumulative sales volume has exceeded 150,000 units since listing. 17-200,000 professional new-class family SUV new Jeep guide, in May 8300 performance also hit a record high since the listing, in the range of 17 to 200,000 before the Japanese evergreen CRV and after the second half of the new brands in Europe and the United States impact Under the circumstances, the new Jeep guides have maintained a momentum of advancement and have become the new king of the auto market with literally 180,000 mandatory guides. The new Jeep Freedom also performed well. With the full upgrade of the value brought by the 2017 new Jeep Freeman, Freeman has always maintained the top three performance of joint venture small SUVs with over RMB 150,000. In just over a year, GAC Fick-made domestic cars have broken through the sales volume of 240,000 units, demonstrating the status of leading global SUV brands with real strength.
Antenk MICRO USB :Micro USB is a miniaturized version of the Universal Serial Bus (USB) interface developed for connecting compact and mobile devices such as smartphones, MP3 players, GPS devices, photo printers and digital cameras.
Micro USB connectors exist or have existed in three forms: micro A, micro B and micro USB 3. USB 3 micro is much like micro B, but with an additional pin group on the side for twice the wires, enabling USB 3's greater speed. Like standard USB, the micro versions are plug-and-play and hot-swappable.
Micro Usb2.0 B Female,Micro Usb SMT Dip,Usb SMT Dip with Flange,Micro Usb B Female SMT Dip
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkelec.com