Jinqiu Decoration Cheats: hood installation and maintenance manual

In the fall, the decoration once again entered the peak season. The Chinese people have always been "the people are eating for the sky", and the kitchen in the decoration is naturally the top priority. Today, Xiaobian will tell you about the major decoration of the kitchen decoration - the installation and maintenance of the range hood.

installation:

1, the use of ambient temperature: -15 ° C - +40 ° C;

2. Altitude: no more than 1000m;

3, the range hood of the range hood must use a dedicated socket with a reliable ground;

4. Install the range hood according to the instructions. The general installation height should not be lower than 650mm, as far as possible, directly above the stove.

maintenance:

1. The installation height of the hood must be appropriate, so as to ensure that the effect of the cooking fumes is ensured without meeting the head;

2. In order to avoid the occurrence of excessive sound, vibration, oil leakage, etc. of the range hood, we should regularly clean the range hood to avoid excessive oil on the inner surface of the motor, turbine and range hood;

3. When using the range hood, keep the air circulation in the kitchen, which can prevent the air in the kitchen from forming a negative pressure and ensure the suction capacity of the range hood;

4, consumers are best not to open the hood for cleaning, because the motor can not guarantee the smoking effect if it is not installed, and will increase the noise; it is best to let the professional staff to clean;

Precautions for use:

1. Open the range hood for 1-2 minutes before cooking to obtain better smoke removal effect;

2. Before replacing the bulb and cleaning the range hood, the plug should be unplugged to cut off the power;

3. When replacing the lamp, the power should not exceed the maximum value indicated in the vicinity of the lamp holder and the manual. Otherwise, the temperature rise of the wires and the lamp holder connecting the lamp holder will be too high, and the aging of the wire insulation layer will be accelerated, resulting in potential danger of electric shock. Even causing a fire;

4. Clean the oil wheel and the inner cavity of the air duct and the inner and outer surfaces of the machine according to the requirements of the manual. Use neutral detergent and soft cloth to avoid damage to the surface or coating of the outer casing.

5, the oil in the oil cup, when accumulated to eight points full, will be discarded, so as not to overflow;

6. After cooking, continue to turn on for 1-2 minutes to completely drain the residual fumes.

Coffee Grinder

Portable Coffee Grinder,Coffee Grinder,Conical Coffee Grinder,Burr Coffee Grinder

FOSHAN FORTUNE ELECTRICAL APPLIANCE CO.,LTD , https://www.coffelady.com