T1 is the input signal transformer, and the primary input signal is divided into two branches by the second two sets of identical coils of T1, which are respectively sent into two amplifying circuits. Resistors R1-R8 are the input impedances of the two amplifiers, which form two AC bridges to ensure the stability of impedance and gain. C3 and C4 are AC bypass capacitors, and C2 and C6 are DC blocking capacitors.
The first part of the amplifying circuit is sent to the input end of the amplifying device by the signal sent from the tandem circuit, and the common pole amplifying circuit is formed by the triode VT1 for the first amplification, and then sent to VT2 and VT3 for further amplification.
Single Mining Power Supply 2400W
Features:
The power supply is 2400W conversion efficiency of 90+
Support graphics card 8, video card 10*6pin
Gold medal stability is strong
Gifts: power line 1:1 distribution
Voltage : 180v-220v 50Hz 10A
DC OUTPUT: 12V---150A MAX
POWER IN : 2400W MAX
Specification:
Name:Mine Chassis Power Supply
voltage : 180v-264v
Specifications
Color:black
PFC Type:active PFC
Power: max power 2400W
Appropriate Type:Ethereum Mining ATX GPU Power Supply 1800W
Features
1. Low noise, low ripple, high efficiency
2. The long life cycle averages above 100KH hours
3.14CM double-rolling fan, good noise, fast heat dissipation
4. Possess complete protection function: over voltage, under voltage
mining hardware,hardware for mining,power supply 750 watts,power supply 1000w,power supply best buy
Easy Electronic Technology Co.,Ltd , https://www.pcelectronicgroup.com