Panasonic will launch LED road lighting fixtures (highway and ordinary roads) on January 6, 2014. The product is equipped with a control function that reduces light leakage to the surroundings to prevent light pollution, and is also equipped with a function of automatically reducing brightness to reduce waste.
The system complies with the “Guidelines for the Adoption of LED Road Tunnel Lighting (Draft)†promulgated by the Ministry of Land, Infrastructure, Transport and Tourism in September 2011 to meet the conditions for use on the expressway.
Panasonic will introduce six types of road lighting fixtures based on the number of lanes (1 to 3 lanes) and brightness requirements. There are a light pole mounting type and a lamp arm mounting type, respectively, and a total of 12 models are available. The colors are all white and can achieve a wide distribution of light for the road. By simultaneously controlling the light distribution at the front and rear (road side and surrounding side) of the lighting fixture, light leakage is reduced, thereby reducing the light impact on the buildings around the road and farmland crops.
The function of automatically reducing the brightness to reduce power waste is called “Initial Beam Compensation Functionâ€, which is equipped with “Timer Segment Dimming Function†for setting power by setting brightness and controlling late night brightness, and “beam upper limit valueâ€. Adjustment function". The timer segmentation dimming function can be used to set the brightness to 50%, and the beam upper limit adjustment function can be adjusted between 80% and 100% by custom processing at 2.5% intervals.
By using these three functions, power consumption can be reduced, and the beam upper limit adjustment function can be used to finely adjust to meet the requirements according to the brightness conditions required by the central government and local governments. The new products are also equipped with tempered glass, fall-proof leads, and "anti-lightning surge function" that exceeds international standards, and are fully considered in terms of safety. In addition, it has durability that can be used at minus 20 ° C, and can also be used in cold areas. Panasonic strives to sell 10,000 units in 2014.
The system complies with the “Guidelines for the Adoption of LED Road Tunnel Lighting (Draft)†promulgated by the Ministry of Land, Infrastructure, Transport and Tourism in September 2011 to meet the conditions for use on the expressway.
Panasonic will introduce six types of road lighting fixtures based on the number of lanes (1 to 3 lanes) and brightness requirements. There are a light pole mounting type and a lamp arm mounting type, respectively, and a total of 12 models are available. The colors are all white and can achieve a wide distribution of light for the road. By simultaneously controlling the light distribution at the front and rear (road side and surrounding side) of the lighting fixture, light leakage is reduced, thereby reducing the light impact on the buildings around the road and farmland crops.
The function of automatically reducing the brightness to reduce power waste is called “Initial Beam Compensation Functionâ€, which is equipped with “Timer Segment Dimming Function†for setting power by setting brightness and controlling late night brightness, and “beam upper limit valueâ€. Adjustment function". The timer segmentation dimming function can be used to set the brightness to 50%, and the beam upper limit adjustment function can be adjusted between 80% and 100% by custom processing at 2.5% intervals.
By using these three functions, power consumption can be reduced, and the beam upper limit adjustment function can be used to finely adjust to meet the requirements according to the brightness conditions required by the central government and local governments. The new products are also equipped with tempered glass, fall-proof leads, and "anti-lightning surge function" that exceeds international standards, and are fully considered in terms of safety. In addition, it has durability that can be used at minus 20 ° C, and can also be used in cold areas. Panasonic strives to sell 10,000 units in 2014.
Ideal for indoor and outdoor installations, including street lighting and architectural illumination, these highly efficient LED Drivers are protected from dust and moisture, providing outputs up to 150W.
Top features include:
- Constant Voltage or Constant Current modes
- Protection: Short circuit / Over-voltage / Over-temperature
- High Efficiencies: Up to 91.5%
- IP67 designs for dry, damp or wet locations
- Fanless design: Cooling by free-air convection
- UL Recognized for US and Canada; FCC Class B
- Comprehensive 5 year warranty!
Metal Case IP65 Waterproof LED Driver
Waterproof LED Driver,0-10V Dimming,Street Light Driver,Waterproof Driver,Waterproof LED Driver,Wide Input AC,CUL Listed Driver
ShenZhen Fahold Electronic Limited , https://www.fahold.com