As lighting has become more energy-efficient, the popularity of LEDs that are gradually replacing incandescent bulbs and fluorescent lamps, and free-form OLEDs is increasingly expected. The use of the necessary amount of LEDs only where necessary, and the use of OLEDs to directly illuminate all surfaces, etc., has brought about an increasing possibility.
From the point of view of energy saving, the use and production of incandescent bulbs, which used to be the main force of illumination, have become less and less. In Japan, the Ministry of the Environment and the Ministry of Economy, Trade and Industry have asked related industries to stop producing and selling incandescent bulbs by 2012, and all major companies have complied with this requirement.
As an alternative light source, Light Emitting Diode (LED) technology has achieved rapid development. Because of its high luminous efficiency, LEDs have become an energy-saving way of being a "new generation of lighting", and have been actively adopted since the time of high cost. As prices continue to fall, LEDs will undoubtedly become the mainstream light source of the future.
Not only in Japan, the global development of LEDs is also accelerating. In South Korea, for example, the country is planning to make LED lighting account for 30% of all lighting by 2015. Countries such as the United States and China are also promoting LED lighting related investments.
As a next stage, the trend of replacing straight-tube fluorescent lamps with LED illumination in a state where the pattern is unchanged has become apparent. Most lighting companies are currently developing and selling products that replace straight tube fluorescent lamps.
The important point of LED lighting is that it is energy-saving, and it can also have the effect of not only replacing the original light source. It has the potential to change the way people and lighting interact with each other in life and work.
This is mainly because the use of LEDs enables dimming and toning of highly free illumination.
For example, LED lighting can theoretically achieve 0-100% full-range dimming that is difficult to achieve with fluorescent lamps. Although fluorescent lamps also have products that support dimming, there is no type that can be freely controlled from 0%.
Moreover, the fact that a fluorescent lamp is lit with a low amount of light shortens the luminous lifetime. After lighting, it usually takes a few minutes to stabilize the amount of light. LED lighting is illuminated with a low amount of light, which can extend the life of the light, and the responsiveness during dimming is relatively high.
Provide the necessary light for the necessary places
In the past, the concept of brighter and brighter lighting was ingrained. Therefore, depending on the situation, the brightness is adjusted, the atmosphere including the color is adjusted, and the like, and there are few examples of actively adopting these functions in houses, offices, and cities. The general use of these features is only commercial facilities.
Under the influence of the Great East Japan Earthquake that occurred in March 2011, this concept began to change. This is because the reality makes people have to adjust the traditional way of life with light. Even now, in eastern Japan, every corner of the house, office, and city maintains a state of drastically reducing the amount of illumination. Out of these experiences, the understanding of "no need to shine too much" has also expanded.
In order to cope with this change of concept, LED is the best light source. Because the LED can simply use the necessary amount of illumination and adjust the color temperature where necessary.
In order to support the advancement of LED lighting, automatic dimming combined with sensors is an effective means. This requires a variety of peripheral technologies and products such as a communication system that connects LED lighting and sensors, and a terminal group that controls and manages them. Increasing the degree of integration is difficult to achieve by the original lighting companies, and should cooperate with companies such as communication equipment manufacturers and construction companies.
Name:150/250V PVC insulated shipboard control cable
Model:DA/SA/NSA/NA type:CKVV, CKVV80, CKVV90, CKVV82, CKVV92
Name:150/250V XLPE insulated shipboard control cable
Model:DA/SA/NSA/NA type:CKJV, CKJV80, CKJV90, CKJV82, CKJV92, CKJ82, CKJ92
SC/NC/NSC type:CKJPF, CKJPF80, CKJPF90, CKJPF86, CKJPF96, CKJ86, CKJ96
CKJPFP, CKJPFP80, CKJPFP90, CKJPFP86, CKJPFP96, CKJP86, CKJP96
CKJPJ, CKJPJ80, CKJPJ90, CKJPJ85, CKJPJ95, CKJ85, CKJ95
CKJPJP, CKJPJP80, CKJPJP90, CKJPJP85, CKJPJP95, CKJP85, CKJP95
Specification:(2~37)×(0.5~2.5)mm2
Executive Standards:IEC60092-350, IEC60092-376
Application:The cable is intended for control system or shipboard and offshore building
Fire Resistant Marine Control Cable
Marine Cable,Fire Resistant Marine Control Cable,Ship Control Cable,Xlpe Control Cable
Jiangsu Jiangyang Special Cable Co,.Ltd. , https://www.jymarinecable.com