Silan Micro Launches High Power Factor Controller SD7530 for LED Lighting

Hangzhou Silan Microelectronics recently introduced the SD7530, a high power factor flyback PWM controller for LED lighting. The chip has the advantages of low starting current (less than 5uA) and high power factor (greater than 0.95). It can be widely used in LED lighting products such as LED fluorescent lamps, and the maximum power can be 60W.

The SD7530 integrates a high-performance analog multiplier and zero current checker for power factor correction and critical conduction mode, respectively. The chip also integrates a current-sense comparator with blanking circuit and an output driver circuit with peak currents of -600mA and +800mA, making it ideal for driving high current MOSFETs.

In addition, the chip has a built-in soft-start circuit that prevents output voltage overshoot at light load start-up, reduces MOSFET voltage stress, and improves circuit reliability. The chip is also equipped with various abnormal state protection functions, such as short circuit protection, power supply overvoltage protection, VCC undervoltage lockout, primary overcurrent protection and overheat protection. The short-circuit protection function can enable the chip to obtain extremely low output short-circuit protection power consumption in the abnormal situation of output short-circuit, and avoid damage to the circuit; and the power supply over-voltage protection function can ensure that the chip is short-circuited or open-circuited. In this case, the system can be effectively protected from damage.

The SD7530 chip is based on the BCD process independently developed by Silan Microelectronics. It has outstanding features such as high integration, small footprint and easy machine debugging. It is available in SOP-8 and DIP-8 packages. The actual application plan is selected.

power adapter from the power transformer, rectifier circuit, shell composition. 9V Power Adapter is a small power adapter, DC cable connector diameter (d) is 2.1mm, diameter (D) is 5.5mm, thickness (B) is 10mm. 5V Power Adapter is high-speed operation and durable, not easy to bad. These power adapter features: product size: 74 * 30 * 42mm, small size, streamlined, completely sealed, easy to carry.cost-effective, high reliability, ultrasonic pressure shell. built-in over voltage, overcurrent and short circuit protection. Products with strong anti-interference, to ensure the use of long life products, through the EMC test, ripple ≤ 50MV.Widely used in Monitor,router and other products.Output conventional voltage 5V 12V 24V 36V 48V, the other can be produced according to customer requirements.

9V AC DC Switching Power Adapter

9 Volt Dc Power Adapter,9 Volt Power Adapter,9 Volt Ac Adapter,9V Ac Power Adapter

Shenzhen Juyuanhai Electronic Co., Ltd. , https://www.powersupplycn.com