Learned from the Institute of Resources and Environmental Standardization of China National Institute of Standardization, "Energy Efficiency Limits and Energy Efficiency Ratings for Ballasts for Metal Halide Lamps" (GB20053-2006), "Energy Efficiency Limits and Energy Efficiency Ratings for Metal Halide Lamps" (GB20054- 2006) Two standards were implemented on July 1, 2006.
There are three main aspects of the energy efficiency standards for metal halide lamps and metal halide lamps: one is the energy efficiency rating. The energy efficiency rating of lighting products in China is divided into 3 levels. The first level is the international advanced level. At present, there are no or only a few products on the market. The second level is the domestic advanced and high-efficiency product, which is the energy-saving evaluation value, reaching level 2 and above. The products can be certified to obtain the energy-saving certification mark; the third level is the energy efficiency limit value, and the third level is the elimination product, which is forbidden to be sold in the market.
The second is the energy efficiency limit requirement, which will be used as a mandatory indicator when the standard is implemented. The energy efficiency limit value is the minimum energy efficiency value of the country's permitted products, and the products below this value are products that are explicitly eliminated by the state.
The third is the energy-saving evaluation requirements, which are recommended indicators and the technical basis for carrying out energy-saving product certification. When the metal halide lamp is a qualified product that meets the requirements for energy conservation evaluation, the enterprise may apply to the National Energy Conservation Product Certification Center for energy-saving product certification and obtain the energy-saving mark and certificate issued by it.
The authenticity of this information has not been confirmed by the international electrical network, for your reference only.
There are three main aspects of the energy efficiency standards for metal halide lamps and metal halide lamps: one is the energy efficiency rating. The energy efficiency rating of lighting products in China is divided into 3 levels. The first level is the international advanced level. At present, there are no or only a few products on the market. The second level is the domestic advanced and high-efficiency product, which is the energy-saving evaluation value, reaching level 2 and above. The products can be certified to obtain the energy-saving certification mark; the third level is the energy efficiency limit value, and the third level is the elimination product, which is forbidden to be sold in the market.
The second is the energy efficiency limit requirement, which will be used as a mandatory indicator when the standard is implemented. The energy efficiency limit value is the minimum energy efficiency value of the country's permitted products, and the products below this value are products that are explicitly eliminated by the state.
The third is the energy-saving evaluation requirements, which are recommended indicators and the technical basis for carrying out energy-saving product certification. When the metal halide lamp is a qualified product that meets the requirements for energy conservation evaluation, the enterprise may apply to the National Energy Conservation Product Certification Center for energy-saving product certification and obtain the energy-saving mark and certificate issued by it.
The authenticity of this information has not been confirmed by the international electrical network, for your reference only.
Ceiling-Mounted Light,Kitchen Light,LED Ceiling-Mounted Light
LED Bulbs & Tubes Co., Ltd. , http://www.nsledlight.com