The fourth phase of Suzhou International Science and Technology Park is located at the southeast corner of the intersection of Airport Road and Tongyuan Road in Suzhou Industrial Park. It consists of two 20-storey modern buildings, which are ideally located in Sujiahang Expressway, Dushu Lake Elevated and even Suzhou. The buildings on the east ring can be clearly seen.
At the beginning of 2008, the owner entrusted Suzhou Yuda Lighting Design Co., Ltd. to carry out a substantial transformation of the original lighting of the building group, striving to create a super-large irregular display that is first-class, dynamic and can be edited freely.
Project design points and implementation difficulties:
(1) It is necessary to realize centralized plane control of light changes between two independent buildings;
(2) It is necessary to solve the change of various colors and pictures in the case that the lamps are still not deformed under the irregular arrangement state;
(3) The east facade of the east side of the building hopes to show the simulation effect of a computer game like "Tetris", and can perform arbitrary editing of various graphics;
(4) The size and installation structure of the LED full-color soft-light tube need to be specially designed, not only to meet the actual size of the on-site building, but also to show the uniformity and continuity of the light, and it can not affect the indoor and outdoor windows. Open
(5) According to the demand of data volume, 12 sets of independent control systems need to realize coordinated synchronous control to jointly represent various program changes;
reference picture:
illustration:
A: signal bus slot and power bus slot, the signal line uses super five types of network cable, and the power supply is powered by AC 220V;
B: Signal and power distribution slot, between each horizontal window, the signal line is connected in series, each window provides a power supply point, 6 lamps are 220V AC power supply, and the optical connection special waterproof connector is used;
C: LED full color soft light tube, model: GLR-GF50-LED-SM-192-8D-1000, the illuminating diameter of the luminaire is 50mm, the single length is 1m/root, the LED is 5mm in diameter and the illuminating angle is 120 degrees. The packaged light source has a line density of 192 grains/meter and a control section of 8 segments/meter;
D: LED full color soft light tube, model: GLR-GF50-LED-SM-192-8D-1160, the illuminating diameter of the luminaire is 50mm, the single length is 1.16m/root, the LED is 5mm in diameter and the illuminating angle is 120 degrees. The packaged light source has a line density of 192/1.16 meters and a control section of 8 segments/1.16 meters. The circuit board is specially designed. The main purpose is to balance the performance of the lighting effect without leaving a clear gap;
The micro Vibration Motor is introduced:
Micro vibration motor is mainly used for adult health care products and toys, micro vibration motor is a Dc Motor, the motor shaft with an eccentric wheel, the use of most of the micro vibration motor voltage is lower than 6 v, probably between 6 mm to 15 mm in diameter, when the motor rotation, eccentric circle particles is not the core of the motor, the motor often lose their balance, due to the inertia effect.
Characteristics: small volume, strong vibration;
Features: small size, fast speed, stable performance, low price, can use battery drive,Can change the different materials of the pendulum head
Method of use: the best stable in horizontal plane, installed on the dc Micro vibration motor output shaft parts, cannot use a hammer to knock, knock prone to press into the Micro vibration motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
Mini Vibration Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a Mini Vibration Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Mini Vibration Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of Mini Vibration Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
Micro Vibration Motor,Mini Vibration Motor,Dc Micro Vibration Motor,Electric Micro Vibration Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com